3D Printing Service - List of Manufacturers, Suppliers, Companies and Products

3D Printing Service Product List

1～9 item / All 9 items

Displayed results
Rubber-like resin 3D printing service

Rubber-like resin 3D printing service

The layer pitch is 32μm, and the dimensional accuracy is 0.1mm! It can be shaped with a soft rubber-like resin.

We offer a 3D printing service using rubber-like resin. Rubber-like resin has properties similar to rubber products, and by adjusting the hardness, it allows for validation close to the final product. It can be used for shape confirmation. Please feel free to consult us when you need our services. 【Service Overview】 ■ Available Hardness: Shore A 27/40/50/60/70/85/95 ■ Size: Maximum size 255mm × 252mm × 200mm ■ Color: Black *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D modeling service <QR code>

3D modeling service <QR code>

Introduction to solutions for creating QR codes that are resistant to degradation.

We would like to introduce our "3D Printing Service." Due to the need to display multiple pieces of information on small products, we have been using labels printed with QR codes. However, we face the challenge of information loss due to issues such as peeling and fading of the labels over time. By 3D printing the QR codes and attaching them to the products, we have made them less susceptible to the effects of aging. 【Features】 ■ Less susceptible to the effects of aging ■ Ability to create text and shapes on the sides *For more details, please download the PDF or feel free to contact us.

  • Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Modeling Service <Resin Pipe>

3D Modeling Service <Resin Pipe>

We will create small lots or resin pipes with special dimensions!

We would like to introduce our "3D Printing Service." While resin pipes can be purchased online from various companies, there are challenges such as dimensional limitations and minimum order quantity restrictions, which may result in not fully meeting requirements. We create resin pipes using a 3D printer. Please consult us regarding diameter, total length, material, etc. 【Overview】 ■Challenge: I want to have resin pipes manufactured, but I can't find a company that can accommodate my needs. ■Solution: Create resin pipes using a 3D printer. *For more details, please download the PDF or feel free to contact us.

  • Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Modeling and Injection Molding Services

3D Modeling and Injection Molding Services

No specialized knowledge is required! We will support everything for beginners!

The "3D modeling and injection molding service" can handle everything from prototype production to mass production consistently. Additionally, while traditional methods incur high costs due to prototype molds for each type, we can produce prototypes without molds, which helps reduce costs. After verifying with prototypes, we can also accommodate mass production through injection molding. 【Features】 ■ Significant reduction in product development time is expected ■ Only hand-drawn sketches are needed ■ Cost reduction *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D modeling service

3D modeling service

An engineer skilled in 3D printing will propose a printing method tailored to the customer's needs!

We would like to introduce our "3D Printing Service." We have three types of 3D printers, capable of producing various shapes such as the size of a soccer ball or gears. We offer a range of materials suitable for different applications, including general engineering plastics, transparent resins, outdoor-use resins, and soft resins similar to rubber. Additionally, if you do not have 3D data, we can create the data for you, so please feel free to consult with us. 【Features】 ■ Supports various shapes ■ Material selection tailored to applications ■ Engineers with specialized knowledge and extensive experience ■ The only requirement from you is the 3D data *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D modeling service <Foldable dedicated desk>

3D modeling service <Foldable dedicated desk>

Introducing solutions to improve usability when using the NW analyzer.

We would like to introduce our "3D Printing Service." When it is necessary to use an NW analyzer in an upright position on a flat surface, the height of the operation buttons and the mouse can differ. This results in the need to bend over more each time the mouse is used, leading to usability challenges. We have created a foldable stand that can be easily attached to the NW analyzer using a 3D printer. By attaching this stand, you can work in the same posture while using the mouse. 【Features】 ■ Allows you to work in the same posture while using the mouse ■ Can be connected with one touch, eliminating the need for additional holes ■ Space-saving when not in use due to its foldable design *For more details, please download the PDF or feel free to contact us.

  • Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D modeling service <jig with mark>

3D modeling service <jig with mark>

Introduction to methods for solving the issue of incorrect jig installation.

We would like to introduce our "3D Printing Service." When attaching a jig to a component, the structure allows for the jig to be attached even if it is upside down. However, due to the compatibility with other parts, it is challenging to change the current shape, which presents certain issues. We will create jigs with directional markers using two-color 3D printing. By making the orientation clear, we can reduce the chances of incorrect installation. [Features] ■ By clarifying the orientation, the chances of incorrect installation are reduced. *For more details, please download the PDF or feel free to contact us.

  • Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Modeling Service <Resin Cap>

3D Modeling Service <Resin Cap>

I want to seal a commercially available resin pipe with a cap, but I'm facing the challenge of not being able to find a company that can accommodate this request.

We would like to introduce our "3D Printing Service." There may be cases where resin pipe manufacturers do not handle caps. Even if they do, there are limitations on shape and minimum order quantities, which can pose challenges when requirements do not match 100%. We create resin caps using a 3D printer. Please consult us regarding diameter, total length, material, etc. 【Overview】 ■Challenge: Want to seal resin pipes with caps ■Solution: Create resin caps using a 3D printer *For more details, please download the PDF or feel free to contact us.

  • Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Modeling Service <Prototype>

3D Modeling Service <Prototype>

Addressing the issue of wanting to confirm the structure of the design before production and prototyping!

We would like to introduce our "3D Printing Service." There are areas where the structure can only be confirmed with a physical model, and the only way to verify if the structure is appropriate is through prototyping, which poses challenges due to the time required for production and acquisition. By creating prototype models with a 3D printer, they can be obtained quickly without the need for molds. Additionally, the structure can be verified in a short time before conducting the actual prototype, which helps reduce the risk of re-manufacturing. 【Features】 ■ Quickly obtainable without the need for molds ■ Structure verification can be done in a short time before the actual prototype ■ Helps reduce the risk of re-manufacturing *For more details, please download the PDF or feel free to contact us.

  • Printer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of 3D Printing Service

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.